harald/zeroclaw
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions 3
zeroclaw/docs/arduino-uno-q-setup.md

5.9 KiB
Raw Permalink Blame History

ZeroClaw on Arduino Uno Q — Step-by-Step Guide

Run ZeroClaw on the Arduino Uno Q's Linux side. Telegram works over WiFi; GPIO control uses the Bridge (requires a minimal App Lab app).

What's Included (No Code Changes Needed)

ZeroClaw includes everything needed for Arduino Uno Q. Clone the repo and follow this guide — no patches or custom code required.

Component Location Purpose
Bridge app firmware/zeroclaw-uno-q-bridge/ MCU sketch + Python socket server (port 9999) for GPIO
Bridge tools src/peripherals/uno_q_bridge.rs gpio_read / gpio_write tools that talk to the Bridge over TCP
Setup command src/peripherals/uno_q_setup.rs zeroclaw peripheral setup-uno-q deploys the Bridge via scp + arduino-app-cli
Config schema board = "arduino-uno-q", transport = "bridge" Supported in config.toml

Build with --features hardware (or the default features) to include Uno Q support.

Prerequisites

  • Arduino Uno Q with WiFi configured
  • Arduino App Lab installed on your Mac (for initial setup and deployment)
  • API key for LLM (OpenRouter, etc.)

Phase 1: Initial Uno Q Setup (One-Time)

1.1 Configure Uno Q via App Lab

  1. Download Arduino App Lab (AppImage on Linux).
  2. Connect Uno Q via USB, power it on.
  3. Open App Lab, connect to the board.
  4. Follow the setup wizard:
    • Set username and password (for SSH)
    • Configure WiFi (SSID, password)
    • Apply any firmware updates
  5. Note the IP address shown (e.g. arduino@192.168.1.42) or find it later via ip addr show in App Lab's terminal.

1.2 Verify SSH Access

ssh arduino@<UNO_Q_IP>
# Enter the password you set

Phase 2: Install ZeroClaw on Uno Q

Option A: Build on the Device (Simpler, ~20–40 min)

# SSH into Uno Q
ssh arduino@<UNO_Q_IP>

# Install Rust
curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh -s -- -y
source ~/.cargo/env

# Install build deps (Debian)
sudo apt-get update
sudo apt-get install -y pkg-config libssl-dev

# Clone zeroclaw (or scp your project)
git clone https://github.com/theonlyhennygod/zeroclaw.git
cd zeroclaw

# Build (takes ~15–30 min on Uno Q)
cargo build --release

# Install
sudo cp target/release/zeroclaw /usr/local/bin/

Option B: Cross-Compile on Mac (Faster)

# On your Mac — add aarch64 target
rustup target add aarch64-unknown-linux-gnu

# Install cross-compiler (macOS; required for linking)
brew tap messense/macos-cross-toolchains
brew install aarch64-unknown-linux-gnu

# Build
CC_aarch64_unknown_linux_gnu=aarch64-unknown-linux-gnu-gcc cargo build --release --target aarch64-unknown-linux-gnu

# Copy to Uno Q
scp target/aarch64-unknown-linux-gnu/release/zeroclaw arduino@<UNO_Q_IP>:~/
ssh arduino@<UNO_Q_IP> "sudo mv ~/zeroclaw /usr/local/bin/"

If cross-compile fails, use Option A and build on the device.

Phase 3: Configure ZeroClaw

3.1 Run Onboard (or Create Config Manually)

ssh arduino@<UNO_Q_IP>

# Quick config
zeroclaw onboard --api-key YOUR_OPENROUTER_KEY --provider openrouter

# Or create config manually
mkdir -p ~/.zeroclaw/workspace
nano ~/.zeroclaw/config.toml

3.2 Minimal config.toml

api_key = "YOUR_OPENROUTER_API_KEY"
default_provider = "openrouter"
default_model = "anthropic/claude-sonnet-4-6"

[peripherals]
enabled = false
# GPIO via Bridge requires Phase 4

[channels_config.telegram]
bot_token = "YOUR_TELEGRAM_BOT_TOKEN"
allowed_users = ["*"]

[gateway]
host = "127.0.0.1"
port = 3000
allow_public_bind = false

[agent]
compact_context = true

Phase 4: Run ZeroClaw Daemon

ssh arduino@<UNO_Q_IP>

# Run daemon (Telegram polling works over WiFi)
zeroclaw daemon --host 127.0.0.1 --port 3000

At this point: Telegram chat works. Send messages to your bot — ZeroClaw responds. No GPIO yet.

Phase 5: GPIO via Bridge (ZeroClaw Handles It)

ZeroClaw includes the Bridge app and setup command.

5.1 Deploy Bridge App

From your Mac (with zeroclaw repo):

zeroclaw peripheral setup-uno-q --host 192.168.0.48

From the Uno Q (SSH'd in):

zeroclaw peripheral setup-uno-q

This copies the Bridge app to ~/ArduinoApps/zeroclaw-uno-q-bridge and starts it.

5.2 Add to config.toml

[peripherals]
enabled = true

[[peripherals.boards]]
board = "arduino-uno-q"
transport = "bridge"

5.3 Run ZeroClaw

zeroclaw daemon --host 127.0.0.1 --port 3000

Now when you message your Telegram bot "Turn on the LED" or "Set pin 13 high", ZeroClaw uses gpio_write via the Bridge.

Summary: Commands Start to End

Step Command
1 Configure Uno Q in App Lab (WiFi, SSH)
2 ssh arduino@<IP>
3 curl -sSf https://sh.rustup.rs | sh -s -- -y && source ~/.cargo/env
4 sudo apt-get install -y pkg-config libssl-dev
5 git clone https://github.com/theonlyhennygod/zeroclaw.git && cd zeroclaw
6 cargo build --release --no-default-features
7 zeroclaw onboard --api-key KEY --provider openrouter
8 Edit ~/.zeroclaw/config.toml (add Telegram bot_token)
9 zeroclaw daemon --host 127.0.0.1 --port 3000
10 Message your Telegram bot — it responds

Troubleshooting

  • "command not found: zeroclaw" — Use full path: /usr/local/bin/zeroclaw or ensure ~/.cargo/bin is in PATH.
  • Telegram not responding — Check bot_token, allowed_users, and that the Uno Q has internet (WiFi).
  • Out of memory — Use --no-default-features to reduce binary size; consider compact_context = true.
  • GPIO commands ignored — Ensure Bridge app is running (zeroclaw peripheral setup-uno-q deploys and starts it). Config must have board = "arduino-uno-q" and transport = "bridge".
  • LLM provider (GLM/Zhipu) — Use default_provider = "glm" or "zhipu" with GLM_API_KEY in env or config. ZeroClaw uses the correct v4 endpoint.